Custom Vertical Industrial Agitators Manufacturers

Mixer Range: Six Drive Configurations

Under the Mixer category we offer the Liquid Mixer line, with six drive and mounting families. Each configuration is positioned for a different tank geometry, loading condition and operating pattern.

If your process only needs homogenization and occasional chemical dosing, a simpler drive may offer the best installed value. For continuous process lines with variable loading, we match the drive family to the duty rather than applying one standard design.

Process and Industry Fit

Vertical industrial agitators from SYEELAI are selected against the actual mixing task, not just tank volume. We distinguish between liquid blending, chemical dosing, solid-liquid suspension and reaction support, because each changes power input, impeller design and shaft arrangement.

• Electroplating: Bath uniformity, additive distribution and temperature equalization in acid or alkaline process tanks.
• Wastewater treatment: pH adjustment, flocculation, coagulant dosing and sludge or slurry suspension.
• New energy: Slurry preparation, material blending and precursor or electrolyte-related mixing.
• Chemical processes: Homogenization, dissolution, neutralization and reaction mixing with corrosive media.
• Pharmaceutical: Reproducible low-shear mixing, dosing consistency and clean-process compatibility.

Wetted Materials and Media Compatibility

Material selection is based on the liquid composition, concentration, temperature and solids content. PP and FRP options are well suited to aggressive acid and alkali service in plating and chemical treatment lines. 316L stainless steel is used where cleaner surfaces, higher temperature resistance or pharmaceutical and water-treatment requirements dominate.

For solid-liquid blending, we review particle size, settling tendency and required suspension level before fixing shaft diameter and impeller type. The same drive frame can be paired with different shaft and impeller combinations, so the material package should be treated as part of the process specification rather than an afterthought.

Configuration Variables for Custom Vertical Industrial Agitators

Our proposal defines the following variables for each mixer:

• Motor and drive: Power rating, speed range, continuous or intermittent operation, standard or explosion-proof enclosure.
• Impeller system: Axial flow for turnover and suspension, radial flow for dispersion or high-shear duties, pitched-blade options for blending.
• Shaft arrangement: Length, diameter, intermediate bearing needs and bottom stabilizer for tall tanks.
• Mounting: Top flange, bridge plate, column support or mobile frame, depending on the tank opening and site access.
• Auxiliaries: Baffles, guide tubes, lifting devices and access covers when process performance or maintenance requires them.

Controls, Dosing System Integration and Installation

Mixers rarely operate alone. In a dosing or treatment line they are interlocked with metering pumps, level switches, pH/ORP instruments, filters and valves. We prepare the mixer package around the required control mode, from simple local start-stop to remote DCS/PLC contact or variable-speed operation.

If your project includes full mixing and dosing skids, we connect the agitator selection to the associated metering and instrumentation scope. Our Chemical Mixing and Dosing Solution covers this integration from design through commissioning.

On delivery, we support installation guidance, non-standard equipment installation and commissioning, remote diagnosis and after-sales maintenance so the line can be started with documented confidence.

Quality Control and Project Support

We operate a full-chain quality inspection system: raw material sampling and verification on incoming goods, fixed-point patrol inspection during production, and full-performance verification of finished products. Inspection records are kept through the process for traceability from source to delivery.

Production is organized in a flexible mode so standard mixers can be delivered reliably while customized configurations remain responsive. Industrial-grade protective packaging is adapted to multi-scenario transport and loading and unloading, with synchronized logistics tracking until arrival.

Information We Use to Configure Your Solution

To prepare a reliable mixer configuration and quotation, we need the following project data:

• Tank and layout: Diameter, straight-side height, working volume, tank cover design and available mounting position.
• Media data: Liquid composition, concentration, pH, operating temperature, viscosity and solids content.
• Mixing objective: Blending, dissolution, suspension, neutralization, reaction or heat transfer; desired batch time or turnover rate.
• Operation: Continuous or batch duty, frequency of starts, speed requirements and any future capacity change.
• Site conditions: Hazardous area classification, motor voltage and frequency, ambient temperature and headroom limits.
• Integration scope: Existing or planned dosing pumps, instrumentation, control system interface and filtration equipment.
• Delivery and acceptance: Required documentation, inspection hold points, packaging method and project schedule.

Frequently Asked Questions

What materials are available for wetted parts?

Our mixers are available in PP, FRP and 316L stainless steel. The final selection depends on the chemical composition, concentration, temperature and abrasion level of the process liquid.

Can a mixer be adapted to an existing tank?

Yes. Custom mounting styles are matched to the tank opening, cover design and site layout, including top flange, bridge plate, column support or mobile frame arrangements.

Can mixers be supplied with explosion-proof motors?

Yes. We supply mixers with standard or explosion-proof motors depending on the hazardous area classification and site operating requirements.

Do you supply mixers as part of a complete dosing system?

We do. Liquid mixers are commonly combined with metering pumps, filters, back-pressure valves and pulsation dampers in mixing and dosing skids, including design, installation and commissioning support.

How are finished mixers checked?

Every product passes through our full-chain quality procedure, from incoming raw material sampling and in-production patrol inspection to full-performance verification of the finished unit.

What support is provided after delivery?

We provide remote diagnosis, on-site guidance and after-sales maintenance, with service files set up for each customer so equipment status can be tracked proactively.

Related Products and Categories

Our portfolio also includes /product/liquid-mixer/type-c-mobile-mixer.html for applications with different operating ranges, interfaces or integration requirements.